profitssraka.blogg.se

Gloomhaven painted minis
Gloomhaven painted minis









gloomhaven painted minis

There is a little visible nub on the outside of the bracelet but I’m ok with it as it really holds the disc in place well. I then painted the wrist/bracelet in the same blue as the disc. I added a little glue on the arm on the side of the disc away from the bracelet to give a little more hold. I put a little glue around the arm by the bracelet and mounted the disk. They are not exactly the same but similar. Check out Painting with Rob: Gloomhaven: Miniature Market Review at the Miniature Market Review Corner. I painted the disk, first in solid blue and then making white swirls and painting on the runes. I used a round file to expand the hole to the desired size. Here I had to bore out the hole so that it fit the arm. The slit in the disk allowed me to easily put the disk on and have it butt up against the bracelet. This bracelet will help hold the disk on. The summoner has a bracelet on that arm and I cut outside of it (leaving the bracelet on the mini).

gloomhaven painted minis

At this point, I figured that this better work but I figured if it didn’t work, I could pin the hand back on. The scariest part was the Luke Skywaker moment of cutting off the hand. This allowed me to easily put the disk on the arm but that part will come later. I then cut from the center straight to an edge with an x-acto blade. This cutter worked nicely since I wanted a hole in the center. I used a Olfa compass cutter for this ( ). I also gave the lower edge of the cloak a very light brown to give it a little fade effect similar to the boots.įor the disc, I cut out a circle from a mini blister pack. I layered whites on the staff to bring it up to a brighter white color so that it stands out from the body. I glazed over the boots in brown lightly at the top and heavier at the bottom to capture a fade effect. For the skin, I glazed over the purple to bring it back to a color similar to the character card, blacked out the eyes and gave a little red to the lips. I highlighted the edges in a couple of whites. The scripting is untouched except to move the bars upward visually to better match their changed height. These are meant to be used in that version of the game, they may or may not work in other versions. I then used a purple wash for the entire figure (citidel leviathan purple). These are the figures for the starter classes from the Gloomhaven - Fantasy Setup (Scripted UI) TTS mod, but painted up in Blender. Thanks! Here are the details on the summoner.įor the mini, I primed in white (though in retrospect, grey might have been a better choice or black with white zenithal highlighting).











Gloomhaven painted minis